Copper Earthing Rod

Our Copper Bonded Grounding Rod Features

Perfectly bonded Copper Bonded Grounding Rod will lost longer, drive easier and will not crack. In Copper Bonded Grounding Rod, Copper purity is 99.95%. The Copper Bonded Grounding Rods is fully covered with copper cladding without any cracks, holes, cavities.

Threads are rolled by roll threading process, which ensures that when copper covers is maintained, at the root of the thread, Roll thread gives greater strength than cut thread. Thread rolling process raises the surface of the rod so that Thread dia. (T) is greater than (S) Magnetic conducting rate is low. Thus reducing the lightning induction.

Good tensile strength in Copper Bonded Grounding Rod, over 600N/mm2.

Resist corrosion better than galvanized rods allowing for a 30-year service life in most soils

Corrosion resistance while providing the lowest resistance to ground.

Preventing exposure of the steel core to soil and moisture. The Copper Bonded Grounding Rod is suitably treated to prevent oxidation of copper bonding.

The Copper Bonded Grounding Rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.

Copper layer thickness can be on request, such as 0.10mm, 0.25mm, 0.100mm, 0.150mm, 0.200mm, 0.250mm etc.

Please note that 0.250mm is also known as 250 micron or 0.10mm as 100 micron but if our customer request for Standard Micron i.e 15-25 micron, than we also manufacture in standard micron